BMW R50-69S LED Lightning

BMW R50-69S LED Lightning


-         Headlight                                                35/35W   BA20D
-         Parking light                                           2W           BA9S
-         Instrument lights (Generator-Neutral)       2W           BA9S
-         Instrument light Speedo                          1,2W         BA7S

-         Rear tail/brake light`                               18/5W      BAY15D
-         License plate bulb                                   5W           BA15S

-         Indicator Light                                         18W

A 1156 bulb is a single filament bulb. All single filament bulbs have parallel pins.
A 1157 is a twin filament bulb. Twin filament bulbs have parallel or staggered pins
E10 or MES is a 10mm cap screw in bulb
BA7s is a 7mm cap with a single contact
BA9s is a 9mm cap with a single contact
T10 is a 10mm cap push in fitting
BA15s is a 15mm cap with parallel pins
BA15d is a 15mm cap with parallel pins
BAY15d is a 15mm cap with staggered (offset) pins
BPF or P36d is a 22mm cap with a 36mm pre focusing washer attached
APF or P15d is a 15mm cap with a pre focusing washer that has 3 keyholes in it
BA20d is a 20mm cap with 2 locating pins

The general rule with LED bulbs is - USE A RED BULB BEHIND A RED LENS USE AN AMBER BULB BEHIND AN AMBER LENS USE A WHITE BULB BEHIND A WHITE OR CLEAR LENS.

This is due to the intensity of an LED bulbs output

The normal 6 Volt light bulbs:


 6 Volt 35W/35W Headlight


6 Volt 2W Parking and Instruments light (Neutral and Generator)


6 Volt 1,2W (speedo illumination)


6 Volt 18W/5W Tail light/Brake light


6 Volt 5W License plate Light


6 Volt 18W Indicator light (LH and RH)

LED LIGHTS:


BA20D HEADLIGHT - FC2A (1X)                £ 28.00 GBP


BA9S Parking light Instrument lights (Generator-Neutral)
 - AC2C (3X)                                         £ 7.95 GBP Total


BA7S Instrument light Speedo – BE2B (1X)    £ 1.75 GBP


BAY15D Rear tail/brake light - AA2A (1)         £ 7.50 GBP


BA15S License plate bulb – AD2B (1x)    £ 6.95 GBP 
ED2D (2X)                                     £ 9.00 GBP Total

You will need an LED compatible flasher unit to flash LED bulbs.
6v Negative earth £ 11.00 GBP

The Ultimate LED Flasher Unit!

Easy to fit. 2 or 3 terminal in one unit.
3rd terminal powers a dashboard telltale - Leave open if not required.
Flying lead must be connected to earth.
Will flash LEDs or a mix of LED and filament bulbs at the legal flash rate.
Traditional audible ticking sound.

Now you can drive around with your lights on Head light/parking light/Speedo light/license plate light) without draining your battery.
No use of converting your 6 Volt system to a 12 volt.